Showing posts with label frames. Show all posts
Showing posts with label frames. Show all posts

Wednesday, November 16, 2011

Paint Chip Dry Erase Board

I found this inexpensive, easy gift project for anyone on your gift list.. friends, teachers, co-workers.  It takes an hour or so and cost about $5.00.

You know those paint chip squares that you get from HD, Lowes or even Walmart.  Anytime, I go to these stores and I frequent them quite a bit, I always choose a handful for reasons such as this, or one never knows when I will want to change the paint on a wall. 

Here is where I got the idea...over at The Aesthetic Writer.  I followed their directions, although I couldn't cut the squares as straight as they did.

I bought a $5.00 11x14 frame at Walmart.  Keep in mind, it needs to be large enough to hold a month of numbers.  I cut the squares to be about 2x2 size.  I then spray painted the cardboard that comes in the frame white, as you can see the board in between the squares.

I taped the squares down, by just taking a little piece of tape rolling it up and sticking it on the back of the square.  That allowed me to adjust as necessary.
You could make another one or several and line a wall, if you need to see months in advance.  Or when the month is over, just grab a tissue and wipe it clean, re-number and you are ready for another month.

Neat, easy peasy idea.

Wednesday, April 6, 2011

Master Bath Part 5...Framed Mirror

The big ole plain mirror in the bathroom lacked style or personality.  Again, after reading many DIY blogs and seeing others frame mirrors...I said I could do that.  And I did.  Everything went together great.  A project well done, if I do say so myself. 
The frame is sold in a packet, which is used to frame a door, cost $10.00.  The corner squares are an extra touch of style.
I caulked a line of mirror liquid nails, making sure to keep the line away from the side that is inside the mirror. Because, if you get it to close to the edge you will be able to see the line reflection in the mirror.

I spray painted it black and then roughed it up, with a light grit sandpaper.  Just enough to make it look worn. You can see here where it didn't connect, but it was level perfect.

I caulked the opening and took a black magic marker and painted it. Perfect.

Ta-Da...beautiful..and the mirror isn't to shabby either.

P.S.  Remember, click on a picture to enlarge.